1. DLLA145P1024 Injection Nozzle’s Basic Information

2. DLLA145P1024 Injection Nozzle’s Common Written Part Number

3. DLLA145P1024 Injection Nozzle’s Application for Injectors Part Number

4. DLLA145P1024 Injection Nozzle’s Car Model Matching Information

5. DLLA145P1024 Injection Nozzle’s Specifications and Dimensions Parameters

Injection Nozzle Size： 6 cm*1.5cm *1.5 cm

Injection Nozzle Barrel Dimensions：7 cm *2 cm *2 cm

Injection Nozzle Net Weight：0.03kg

Injection Nozzle 10 PCS Per Box：10 cm *8 cm *4cm

Injection Nozzle Weight 10 PCS Per Box ：0.3kg

Injection Nozzle Quality：China Made New Injection Nozzle

Injection Nozzle MOQ：10 PCS

6. DLLA145P1024 Injection Nozzle’s Quality Control

（1）Injection Nozzle Testing

All parts of the injection nozzle are subjected to precision testing, high temperature testing, low temperature testing, withstand pressure testing, leakage testing, durability testing, and various working conditions testing.

（2）Injection Nozzle Inspection

The factory inspection of the injection nozzle is undergone full inspection, random inspection, and batch inspection three inspections. Different brands of test benches are used to test the same Injection Nozzle for a total of no less than three times for factory inspection, and the fuel injector installation testing environment are progressed in dust-free workshop.

（3）Injection Nozzle Installation

When matching the nozzle needle and nozzle, Shumatt strictly complies with the standard of nozzle needle and nozzle clearance technical indicators to ensure that each injection nozzle meets the factory standards and use standards.

7. DLLA145P1024 Injection Nozzle’s Causes of Damage 

（1）Fuel injection nozzle failure caused by impurities (water, lead, aluminum powder, iron powder, sulfide) in fuel exceeding standard requirements.

（2）The nozzle is normally worn due to long time working under high temperature

（3）Nozzle needle wear leads to oil hole blockage, insufficient fuel injection injector cannot work properly.

• Nozzle needle wear leads to oil hole blockage, insufficient fuel injection injector can’t work properly.
• The wear of the nozzle leads to the increase of fuel quantity, resulting in black smoke of the vehicle, and the fuel injector can’t work properly when it is serious.
• If the nozzle needle can’t move smoothly stuck may cause serious damage to the Injection Nozzle
• The rusting of the nozzle spring leads to spring fracture and black smoke from the vehicle.
• The opening pressure of the nozzle decreases, and the oil quantity of the injector increases, leading to black smoke of the vehicle, and the injector can’t work properly when it is serious.
• Oil-nozzle needle valve lift adjustment gasket wear oil-nozzle needle valve stroke becomes larger, the fuel injector oil quantity becomes larger, resulting in black smoke of vehicles, resulting in the fuel injector can’t work properly when serious.

The cracking of the nozzle cap is caused by high intensity work under high temperature.

8. DLLA145P1024 Injection Nozzle’s Installation Precautions

• Clean the injection nozzlein an ultrasonic cleaner for 3-5 minutes before installation, so as to make the stains, dust, rust-proof oil oxides, paraffin base, naphthenic base, intermediate base, salt, lead naphthenate, zinc naphthenate, sodium petroleum sulfonate, barium petroleum sulfonate, calcium petroleum sulfonate, tallow diamine trioleate, rosinamine on the surface of the valve assembly fall off.
• Use compressed air to clean the cleaning fluid attached to the surface of the Injection Nozzleafter cleaning, and clean it up to the standard of use, as below

9. DLLA145P1024 Injection Nozzle’s Packing

Domestic express packaging：Usually wrapped in waterproof scotch tape, such as picture No.1.

International express packaging：Wrapped with waterproof yellow tape After wrapping the black protective film, such as picture No. 2.

Pallet Shipping：Use fumigation free and recycling trays that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties for the outside, such as picture No. 3,

Also, the products can be packaged according to customers’ requirements.

• The packing tray is made of plastic and can be recycled.
• Transparent tape, yellow tape, black wrapping protective film, white wrapping protective film are non-degradable materials, please dispose of them properly.
• Minors are prohibited from using transparent tape, yellow tape, black wrapping protective film, andwhite wrapping protective film to avoid personal injury.

Domestic express packaging：Wrapped with Transparent tape	International express packaging：Wrapped with yellow tape after wrapping with black protective film	Pallet Shipping：Use pallet that meet export requirements, and use white wrapping protective film to wrap and bind with cable ties